FunFormance

The White Tiger


The very first White Tiger was a side project board for John John Florence, who rarely rides 'fun' boards. It sat in his garage for maybe a year, and in the meantime I made a few for his little brother Ivan. It was the perfect design to fit Ivan's surf/skate style and soon he was telling us how much he loved it and sending us clips of him doing big carves and boosting airs on it. Finally JJF pulled his 5'6" out and was immediately having a blast on it too. Now its one of John's favorite boards to ride whenever he has some time off from the tour and just wants to play around with something different.

It has a clean but stubby outline, with a very full nose and wide squash tail. There is no hip and the wide point is 1 ½" forward of the center. The tail measurement is just slightly wider than the nose. The thickness is also concentrated forward, with a beak-nose design that helps keep the volume up under the chest area for better paddle power.

The bottom rocker is even and flowing, flat throughout the board and designed to get up on top of the water quickly, which lets you build and carry speed with ease. The bottom has a single/double concave running through the front 2/3s of the board which transitions into a pronounced vee/double concave in the last 1/3 through the fins and off the end of the tail. The single/double concave give the board lots of lift (think speed) while helping to let the wider design transition from rail to rail with ease. The vee running off the tail also helps the board tip over onto the rail at speed and lets you turn it up into the lip with ease.

It has a relatively flat deck that blends out into tapered rails. This keeps a lot of volume in the board while still keeping it sensitive through turns and easy to pump down the line without feeling too boaty for its volume.

We recommend you ride the White Tiger anywhere from 2-5" shorter than your regular shortboard depending on your surfing ability, and ½ to 1" wider and add a bit more volume than you normally ride. (JJF and Ivan both ride 5'6" White Tigers and their normal boards are 6'0").

- White Tiger SPECS -
Full
Thruster, Quad, and 5-Fin
1FT - 6FT
Full | Thruster, Quad, and 5-Fin | 1FT - 6FT
Medium Low
Single with Double to Deep Vee
Medium Low
Medium Low|Single with Double to Deep Vee|Medium Low
Play
Play

Standard Dimensions

Size Width Thickness Volume
5'0" 18 3/4" 2 1/4" 24.00L Custom Order
5'2" 19" 2 5/16" 25.50L Custom Order
5'3" 19 1/8" 2 3/8" 26.90L In Stock
5'4" 19 1/4" 2 7/16" 28.20L In Stock
5'5" 19 3/8" 2 1/2" 29.50L In Stock
5'6" 19 1/2" 2 1/2" 30.10L In Stock
5'7" 19 3/4" 2 9/16" 31.70L In Stock
5'8" 20" 2 5/8" 33.50L In Stock
5'10" 20 3/8" 2 11/16" 35.90L In Stock
5'11" 20 1/2" 2 3/4" 37.50L In Stock
6'0" 20 3/4" 2 3/4" 38.40L In Stock
6'2" 21" 2 13/16" 40.90L In Stock
6'4" 21 1/2" 2 7/8" 44.10L In Stock
6'6" 21 3/4" 3" 47.90L Custom Order
6'8" 22" 3 1/16" 50.40L Custom Order

VOLUME CALCULATOR

Our volume guide can help you figure out a good estimated volume for you to base your next board off of.

Ability/weight/volume numbers are not exact, but can give you an idea of where to start. This chart is assuming volume for a basic performance board to be ridden in weak to good waves.

  • Generally speaking, you would want to ADD volume for a board designed for smaller, weaker conditions.

  • You would also ADD volume for a step-up/gun board for use in even bigger, more powerful waves.

  • Added weight (thick wetsuit, booties, etc.) should be calculated into your weight.

  • You generally want to balance the added ease of paddling (more volume) with sensitivity and performance (less volume).